A - 15
Remove the Cassette from the vinyl bag. Remove the shipping tape and cardboard.
1
2
Note: To remove the Baseplate retaining cardboard, carefully slide them forward and then remove.
3 Press down the Baseplate until it locks into position.
4 Place a sheet of paper on the Baseplate and check to see that the Cassette is set for that paper size.
Note: Refer to the Specifications for appropriate paper sizes.
5 To change the Cassette Paper size, remove the
necessary screws and re-position the guides for the new size.
Note: Do not overtighten the screws. They can strip out if care is not taken.
6 Fan the paper stack thoroughly and align its edges.
7 Load the paper into the Cassette.
Note: If you are using pre- printed stock such as letterhead, place the side to be printed face down.
Setting Up the (Optional) SPCU
Loading the Cassette

Unpacking & Installation

Page 217
Image 217
LG Electronics MF3800, MF2800 manual Unpacking & Installation