Setting Up Fax Unit
Unpacking & Installation A - 10

Turning Power ON

1Turn the Main ON/OFF
Switch to the ON position.
CAUTION
Allow at least three
seconds after turning the
Main ON/OFF Switch
ON or OFF before
pressing it again.
2After the power is turned
ON, the fax goes through an
initialization cycle until it is Ready. If not used for a period of time, the fax
unit goes into the Standby mode.
3If a problem occurs during a transmission causing the lose of system data
or memory, this unit generates a Power Fail Report and emits short
intermittent beeps.
I
O