LG Electronics MF2800, MF3800 1, 2, 3, 4, 5

Machine Operations

4 - 11 Facsimile Programming

Setting the Power Save Mode

This program allows the user to set their fax unit to automatically enter the power saving

mode at a specified time. You can also set the Power Save Mod e to OFF. If the ON time

and the OFF time are set the same, the Power Save Mode will remain ON continuously.

1Press the PROGRAM Key and scroll through the

menus until you reach the Machine Operations

menu and press YES.

2Press 7 or press the down arrow six times to reach

the Power Saver Mode Menu. Press YES.

3Use the Left/Right Arrow Keys to select either OFF

or TIMER and press YES.

Note: The ON time refers to the time the unit will go into Power Save Mode.

The OFF time is the time it will re-enter a READY or STANDBY mode.

4Enter the time you wish the unit to enter Power

Save Mode and press YES.

5Enter the time you wish the unit to leave Power

Save Mode and return to normal operation.

Note: There are three situations to leave Power Save Mode and return to

normal operation.

1.Press Wakeup Key

2.Telephone rings.

3.Time up for Timer TX.

But if I-Fax / PCL4 / GDI / PCL5e is optioned, these devices can not

Wakeup the machine from Power Save Mode, before using these

devices be sure the machine is in normal operation, press Wakeup Key

to Wakeup the machine, if the machine is in Power Sav e Mode.

MACHINE OPERATION?

YES / or 1-8

7 POWER SAVE MODE?

OK=YES

OFF *TIMER

-SELECT&PUSH”YES”-

ON TIME=_0:00

OK=YES

OFF TIME=_0:00

OK=YES

Contents

Main Page Page IMPORTANT SAFETY INSTRUCTIONS LASER SAFETY INTERNAL LASER RADIATION (for all Uers) For United States Users Laser Safety CDRH Regulations For users In Other Countries For European User For Denmark Users For Finland, Sweden User For Norway Users Page CE Marking (Declaration of Conformity) USER INSTRUCTIONS (For U.S.A.Users) FCC PART15-RADIO FREQUENCY DEVICES WARNING FCC PART 15 - RADIO GREQUENCY DEVICES WARNING FCC PART 68 - TELECOMUNICATION DEVICES This equipment uses THE FOLLOWING USOC JACKS: RJ11C Page USER INSTRUCTIONS (For Canada Users) INTERFERENCE-CAUSING EQUIPMENT STANDARD (ICES-003 ISSUE 3) WARN ING INTERFERENCE-CAUSING EQUIPMENT STANDARD (ICES-003 ISSUE 3 ) WARN ING IC CS-03-TELECOMUNICATION DEVICE HEARING AID-COMPATIBILITY (For U.S.A./ Canada Users) For Australian Users For New Zealand Users OZONE RELEASE (For all Users) Page Page Page Table 1: Warning and Precaution Symbols Table 2: Meaning of Symbols Page Page Page Precautions for Routine Use Miscellaneous Table of Contents Chapter 1 - Introduction Chapter 2 - Basic Operations Chapter 3 - Advanced Facsimile Chapter 4 - Facsimile Programming Chapter 5 - Internet Fax(Option) chapter 6 - PC Printing & Scanning Chapter 7 - Maintenance & Supplies Chapter 8 - Troubleshooting Chapter 9 - specifications Appendix - Unpacking & Installation Page Page Page Introduction to the MINOLTAFAX2800 and MINOLTAFAX3800 Units Introduction to the MINOLTAFAX2800 and MINOLTAFAX3800 Units MINOLTAFAX2800 and MINOLTAFAX3800 Model Differences* How to Use This Manual Agency Certification Page Page Multi-Tasking Multi-Tasking Machine Components Page Page Introduction 1 - 8 Control Panel Layout SPEAKER DELETE PIN CODE FUNCTION YES NO 7 8 9 10 11 12 13 14 15 16 to enter ITU-T Sub-address in setting One-Touch or Speed Dial Keys. Introduction 1 - 10 FUNCTION YES NO 17 18 19 20 22 21 23 24 25 26 27 28 Page Definition of Display Symbols @ Page Page Sending a Document Using Memory Transmit 1 2 3 4 5 6 7 Memory Overflow Transmit ENTER FAX NO. or FUNCTION 1 2 3 4 5 6 7 8 (7776665555) -PUSH START KEY- Page Dialing Methods Dialing Methods You can use the following methods to dial a remote facsimile number from your unit. Receiving a Document Auto Receive 1 Manual Receive 1 2 Memory Receive (Memory Lock) 1 2 3 4 5 6 Page Page Making Copies 6 7 8 9 10 *COPY* COPIES=01 OK=START *COPY* COPIES=02 OK=START(SORT=YES) Page Page Broadcast 1 2 3 4 Timer TX (Delay Transmission) 1 2 3 4 Page Print Mailbox RX 1 2 3 4 Page Page Page Polling RX 1 2 3 4 5 Page Page Page JOURNAL Key JOURNAL Key 1 2 3 1 (MAR.01 14:00)TX NY OFFICE -OK Page Reports Reports Transmit Message Confirmation Manual TX Report 1 2 3 SCHEDULE Key 1 2 3 4 PIN CODE Key 1 2 3 PIN=_ OK=YES _ (TX=START) SPEAKER Key 1 2 3 4 Page Page Accessing The User Program Area Menu Navigation 1 2 3 4 5 Menu Structure Page Facsimile Programming 4 - 4 Entering Numbers and Letters SPEAKER @ 1 the 10-Key Pad. 2 use the One-Touch Keys. 3 Page Page Machine Operations Setting the LCD Contrast 1 3 Setting the Correct Dialing Type (Tone/Pulse) 1 2 3 Setting the Line Monitor (Speaker) Volume 1 2 3 Selecting Remote Monitor 1 2 3 Setting Your Fax Line Type (PSTN/PBX) Setting the Power Save Mode 1 2 3 4 5 1 2 3 Setting the Drum Counter 1 2 3 4 Document Scan Settings Resolution 1 2 3 1 2 3 Print Density 1 2 3 Reduction Copy 1 2 3 Rec. Paper Size 1 2 3 4 Auto Cassette Sel. 1 2 3 4 5 6 Dial Registration One-Touch Keys 1 2 3 4 5 2 3 5 Speed Dial Keys 1 2 3 4 Page 5 6 7 2 3 Program Dial 3 4 5 6 7 Page 7 8 2 3 Batch TX 1 Page Relay box 1 2 3 4 5 TX Operation Default TX 1 2 3 1 2 3 Fax Forwarding 1 2 3 4 5 Page Header 1 2 3 RX Operation Memory RX Mode 1 2 3 4 5 6 7 8 9 1 2 3 Two Page Print 1 2 3 Reduction RX 1 2 3 Mailbox RX 1 2 3 4 5 Closed Network 1 2 3 RX Mode 1 2 3 Footer (Receive Time Print) 1 2 3 Page 12 13 14 Line 2 Setting Line 2 Fax No. 1 2 3 2 3 Line 2 Tone / Pulse 1 2 3 Reports Activity Report 1 3 Reserv. (Reservation) Report 1 2 3 RX Results Report 1 2 3 Broadcast Report 1 2 3 Toner Low Report 1 2 3 4 Reports Other Reports and Lists Page Page Page Programming Internet Fax settings components of Internet Fax Page SERVER SETTING 1 2 3 4 POP3 INTERVAL 1 2 3 4 TIME OUT SETTING 1 2 3 ERROR REPORT 1 2 3 TIME ZONE 1 2 3 Setting up the Internet Fax Page Speed Dial 1 2 3 4 5 6 7 1 2 3 4 5 Page Basic Operations of Internet Fax Manual Transmission(Single Location) 1 2 3 1 1 2 3 Advanced Operations of Internet Fax Broadcast 1 2 3 4 1 2 3 4 5 One Touch, Speed Dial, and Group Dial Page Page Page Page Page Set Printer Set Printer Number of Copies 1 2 3 Symbol Set 1 2 3 Font Number 1 2 3 Line Number 1 2 3 Print Font 1 2 3 PCL4 Enhance 1 2 3 4 GDI Enhance 1 2 3 4 Memory Allocations Memory Allocations Standard Memory Configuration Choices MINOLTAFAX2800 / 3800 Memory configuration for Fax / GDI printing Memory Allocations MINOLTAFAX3800 Fax Memory configuration for Fax / GDI printing Page Page Printer Messages Printer Messages Auto-Select Paper Tray Page GDI Printer Feature(option) Connecting to Your PC Installing The Printer Driver Windows95 1 2 3 4 5 6 Page GDI Printer Feature(option) Configuring the GDI Print Settings Printing with your GDI Print Function Getting Help Page Scanning (TWAIN Driver Option) Scanner Troubleshooting File access error Class 1 Fax/Modem Class 1 Fax/Modem Class 1 Interface PC Requirements Class 1 Fax/Modem Page Page Page Page Page Page Page Page Page Clearing Paper Jams Paper Jams 1 2 3 4 1 Page Page Page Page Page Page Page Page Page Page Troubleshooting Error Indication Types Error Messages Page Page Troubleshooting Tips Page Page Page Physical Specifications Physical Specifications Height width Depth Electrical Specifications Operational Specifications Page Facsimile Specifications Optional Accessories Specifications Class 1 Interface (RS-232) PC Interface LAN Interface (Print Server) Internet Fax Item Specification Remark Page Dual Line Page Page Unpacking Unpacking Main Carton Contents Unpacking Accessories Box Contents Page Page Installing the Paper Exit Tray 1 Installing the Document Exit Tray Page 4 1cm 5 6 Page Page Turning Power ON 1 2 3 Final Checkout Final Checkout Preparing Your Fax Unit Page Setting Up the (Optional) SPCU Setting Up the (Optional) SPCU Unpacking the SPCU Page Page Page Page Page Symbols A B C D L M O P R T U