8 Antex Electronics
You must press the SELECT button within four seconds of choosing a new channel or the channel change does not take effect.
You can also tune to a specific channel directly simply by pressing in its channel number using the NUMERIC buttons.
?When you enter a
?When you enter a
When preset channels have been set, you can access those presets simply by pressing the PRESET button, then an appropriate numeric button. For example, if preset 0 were set to Rock, preset 1 to Pop, and preset 2 to News, you could jump to the News channel quickly by pressing
Setting and Recalling Presets
Each zone can h ave 10 channel presets (numbered 0 to 9). To assign a preset for the selected zone, first tune to a desired audio channel. Press and hold the PRESET button for one second, followed by a numeric button. For example, if you want to set channel 44 to preset 9, press and hold the PRESET button for one second, then press the numeric button “9.” Note that the title bar display changes to “PRESET” to let you know that TriplePlay is ready to assign a preset channel.
To recall a stored preset, press (but don’t hold) the PRESET button and then the desired numeric button
Configuring Options
TriplePlay's SETUP mode allows you to configure TriplePlay options (blocking, skipping, and adding channels) and obtain the unit’s SIRIUS ID numbers for activation.
Entering SETUP Mode
To enter the SETUP mode, press and hold the POWER button for four seconds. The menu shown in Figure 5 appears.
ADD OR SKIP
PARENTAL CONTROL
SIRIUS ID NUMBERS
RETURN
Figure 5 SETUP mode menu.
In SETUP mode:
?The CHANNEL up/down buttons are used to scroll though the menu options.
?The SELECT button is used to confirm selections.
© 2003 Antex Electronics, Inc.
