Toshiba B-SX4T-GS20-QM-R 01H Start of the status block, 04H End of the status block, Odh, Oah

Supplemental explanation of parameter “I”

When Gen2 tag is used, options for the parameter “I” are as follows: I1: TID & User area data

I2: EPC data

I3: EPC data + TID & User area data

As the readability of the TID & User area differs depending on the tag manufacturers, refer to the memory map of each tag.

Example)

•In the case of OMRON’s Gen2 tag

4-byte TID area is readable, and the user area is read/write protected.

•In the case of HITACHI’s Gen2 tag (Hibiki)

8-byte TID area is readable/writable and 30-byte user area is readable/writable.

(4) The format of information to be returned to the host is as follows.

SOH	01H	Start of the status block
STX	02H
“F”	46H
		30H30H: Reading failed.
	30H	31H31H: I-Code
		31H32H: Tag-it
		31H33H: C220
Tag		31H34H: ISO15693
		31H35H: C210
type		31H36H: C240
		31H37H: C320
	30H	32H31H: EPC Class 0
		32H32H: EPC Class 1
		32H33H: ISO18000-6B
		32H34H: EPC Class 1 Generation 2
Data	---	Tag data (0 bytes to 9999 bytes)
ETX	03H
EOT	04H	End of the status block
CR	ODH
LF	OAH

- 252 -