Toshiba B-SX4T-GS20-QM-R manual SX4T SX5T

(4)Feed speed

•A feed is performed at the designated speed.

However, the back feed speed in the cut mode or the strip mode is 3 ips. This back feed speed can be changed from 3 ips to 2 ips in the system mode.

•For B-SX4T, the print speed “10 ips” is not supported for printing with the rotary cutter. If “10 ips” is specified when the rotary cutter has been installed, the print speed is corrected from 10 ips to 6 ips, regardless of the cut designation.

•The possible issue speed varies according to types and sizes of the paper supply. For details, refer to the Supply Specification.

	Model	B-SX4T		B-SX5T
		Rotary cutter	Rotary cutter
	Parameter	not installed	installed
	1
	2	3 ips	3 ips	3 ips
	3
	4
	5			5 ips
	6	6 ips
	7		6 ips
	8
	9	10 ips		8 ips
	A
(5)	With/without ribbon

Without ribbon: The ribbon motor is not operated at feed.

With ribbon: The ribbon motor is operated at feed.

With ribbon saving: When the use of the ribbon saving system is set to ON (used) in the system mode, ribbon saving will be performed automatically.

When “without ribbon saving” is selected, or the use of the ribbon saving system is set to OFF (not used) in the system mode, ribbon saving will not be performed.

- 185 -