f:User block password read/write permanent lock designation (Effective to Bank4 to Bank8 only)
0:Disabled
1:Enabled
NOTES:
1.Once a permanent lock is enabled for parameter b, d, or f, any subsequent change is disabled.
2.When read/write permanent lock is selected, a read/write lock state is retained. To permanently prohibit reading/writing a tag, enable both the read/write lock and the read/write permanent lock. The setting which disables read/write lock and enables read/write permanent lock allows the tag to be read/written permanently.
Xghhhhhhhh: User block access password execution setting (Effective only when the Hibiki tag is used for the
Designates a password to access and write a tag of which user block is
Up to five user blocks can be specified continuously.
For example: X4AABBCCDD,X5BBCCDDEE,X6CCDDEEFF
g:Designates a user area bank. (4 to 8)
4:Bank4 (User block 1)
5:Bank5 (User block 2)
6:Bank6 (User block 3)
7:Bank7 (User block 4)
8:Bank8 (User block 5)
hhhhhhhh:User block access password Fixed to
uvvvvvvvvvv: Increment/Decrement
(Omissible. When omitted, incrementing/decrementing is not performed.)
u:Indicates whether to increment or decrement +: Increment
vvvvvvvvvv:Skip value (10 digits) 0000000000 to 9999999999
Max. 512 digits, but the number of digits to be written is different depending on the tag types.
01 to 99 (1 to 99 can also be used.)
Up to 20 fields can be designated using commas.
- 114 -