CONTROLS & CONNECTIONS
PIN 1 | GND |
|
PIN 2 | High | (+) |
PIN 3 | Low | |
|
|
|
Cable Wiring Diagram for Input and Output XLR
The Output XLR Connector is servo balanced and operates at +4dBu.
The Return / Line In connector of the M80 is provided for use in conjunction with audio process devices such as compressor/limiters and as a Line In for recording media such as tape machines, hard
disc recorders, or DAT’s. When a device is connected to this jack, the Neutrik™ Combo jack is disconnected.
TIP | High | (+) |
RING | Low | |
SLEEVE | GND |
|
|
|
|
Cable Wiring Diagram for Balanced Send / Return Jacks
The Send Jack on the back panel of the M80 routes the signal being processed by the channel to outboard devices or to recording media.
Left and Right XLR Auxiliary Inputs are available for routing stereo signals into the Stereo Mix Bus. The Aux Inputs can be used to introduce a stereo single such as the output of a stereo tape machine to the Stereo Mix Bus of the M80. The various input signals of the individual channels of the M80 can then be mixed with the introduced stereo signal by using the PAN controls located on the individual channels.
These Aux Bus Inputs can be used to combine the outputs of multiple M80’s. The M80’s can be cascaded by connecting the Stereo Mix Bus Outputs the Aux inputs of the next M80 in line. The combined signal to the XLR Stereo Mix Bus outputs of the last M80 in the signal chain becomes the master output of the cascaded M80’s.
11