Intel MPCMM0001 manual Snmp Trap Control, System Events- SEL Support, SEL Header Format

Unrecognized Sensor Types

28.3.1SNMP Trap Control

To assist with backward compatibility a variable exists called SNMPSendUnrecognizedEvents. This controls whether the CMM should not send SNMP traps for unrecognized SEL events (a value of 0) or begin sending SNMP traps for unrecognized events (a value of 1). The default value is 0.

Table 110. Results of Variable Settings

	SNMPTrapFormat Control
	1 (text)	2 (raw)	3 (text&raw)
			Standard output + Raw
		Header + Raw	information. Helps in cases
Recognized Event	Standard output only		where the event is partially
		display
			translated in the text
			portion.
	SNMPSendUnrecognizedEve
	nts =0
	Not sent
	SNMPSendUnrecognizedEve		Header, Text, and Raw
Unrecognized	nts =1
			output. The Text portion will
Event		Header + Raw	simply state that the CMM
	Useful in allowing the user to		could not translate the
		display	event.
	see that there are
	unrecognized events;
	however, it does not give
	enough information to
	understand the event.

28.3.2System Events— SEL Support

When a user lists the contents of a SEL with the cmmget command, the format for the SEL has three possible parts: the header, the translated text, and the raw output.

All CMM displayed SEL entries have a standard header that is shown below. For the SEL, this includes only the Timestamp followed by a newline.

28.3.2.1SEL Header Format

TimeStamp\n

TimeStamp has two possibilities:

1.A SEL event that has a timestamp (recognized System Event Records and OEM timestamped events). It is in the format: [Day] [Month] [Date] [HH:MM:SS] [Year]. For example, Thu Apr 14 22:20:03 2005.

2.OEM non-timestamped sensors. That format will be: Date/time unknown.

28.3.2.2SEL Text Translation Format

The next portion of the SEL entry can be enabled or disabled as described later in this section. This

256MPCMM0001 Chassis Management Module Software Technical Product Specification