Intel MPCMM0001 manual Software update must be executed again to solve the problem

Updating CMM Software

—Exit if error occurs

7.Validate that .zip file matches checksum in .md5 file

—Exit if no match

8.Unzip the .zip file in the package directory on ramdisk

9.Validate that all files in the unzipped package match the md5 checksum in the validationFile.

—Exit if any files fail

10.Validate that the package matches the CMM platform ("cpci" or "atca")

—Exit if mismatch

11.Transition to Update Mode

—Call any user supplied scripts in /home/update/scripts/K*

—A call to /etc/rc.d/init.d/userScripts stop

—Shutdown CMM apps (/etc/rc.d/init.d/cmm stop)

—Copy /etc to /usr/local/cmm/temp/update/etc

—Unmount /etc and /home

—Exit if any of these filesystems cannot be unmounted

12.Update Components (listed in UpdateMetadata file)

—If a component update fails Stop updating components Attempt to remount /etc and /home

Exit the update process, but do not reboot

—If the component is "etc_jffs" then Remount /etc and /home

Call any user supplied scripts in /home/update/scripts/S*

Process saveList - copying files and directories from /usr/local/cmm/temp/update/etc to /etc

13.If the process has been successful so far then

—Remount /etc and /home

—Update the /etc/versions file - backing up the old one as "/etc/versions.<version>"

—Copy the update.log file from ramdisk to /etc/cmm/update.log

—Reboot CMM

If an update fails to complete, the CMM will not load the application stack upon rebooting. The following message will be displayed upon failure:

Startup of CMM applications has terminated due to detection of an inconsistent software load.

The software update must be executed again to solve the problem.

214MPCMM0001 Chassis Management Module Software Technical Product Specification