Intel MPCMM0001 manual Cmm Location 1.3.6.1.4.1.343.2.14.2.10.3 Sheet 2, CMM2

SNMP

Table 63. Cmm Location (1.3.6.1.4.1.343.2.14.2.10.3) (Sheet 2 of 3)

OID	Object	Syntax	Access	Value
				The timeout value in minutes for the
				Telco Alarm cutoff. This is the amount
				of time before the alarm cutoff will
				automatically become unset if the user
24	cmmAlarmTimeOut	INTEGER	read-write	doesn't unset it themselves. A value of
				0 will disable the timeout. This dataitem
				is only valid when used with the cmm as
				the location and is used to set the alarm
				timeout or get its value.
				The LED on the CMM faceplate that
25	cmmCriticalLED	INTEGER	read-write	indicates presence of critical events in
				the system. 1 - Set, 0 - Clear
				The LED on the CMM faceplate that
26	cmmMajorLED	INTEGER	read-write	indicates presence of major events in
				the system. 1 - Set, 0 - Clear
				The LED on the CMM faceplate that
27	cmmMinorLED	INTEGER	read-write	indicates presence of minor events in
				the system.1 - Set, 0 - Clear
				Used to induce a failover from the
28	cmmFailover	INTEGER	write	active cmm to the standby cmm.
				1 - Enable, 2 - any
	cmmsEthernetA			When get, it displays the Eth0 or Eth1
	cmmsEthernetB
				connectors of both CMMs, CMM1, or
29 -	cmm1EthernetA	INTEGER	read-write	CMM2.
34	cmm1EthernetB			When set, it routes the selected
	cmm2EthernetA			Connection between the front or rear
				connectors. Valid Values: front / rear
	cmm2EthernetB
35	cmmListLocations	DisplayString	read-only	list of Locations information
36	cmmListPresent	DisplayString	read-only	list of Present Entities information
37	cmmPowerBudget	DisplayString	read-only
38	cmmBusedEkeys	DisplayString	read-only
39	cmmClearSel	INTEGER	write	To clear the SEL set the object with 1 to
				clear. Other value - has no effect
				List of boards/delay pairs indicating the
40	cmmPowerSequence	DisplayString	read-write	power sequence of the boards in the
				Chassis
				This is used to find out the current
				power state of the CMM. Format text -
41	cmmPowerState	DisplayString	read-write	Location: CurrentState (Mx) where Mx
				is the ATCA-defined M state of the
				location.
				Settable value:reset, poweron, poweroff
42	cmmFeedCount	DisplayString	read-only	Get the power feed count
				This is an Intel extension command for
43	cmmFRUExtractionNotify	INTEGER	write	PICMG 3.0. Used to notify the Shelf
				Manager that a FRU has been
				extracted from the shelf. Valid value: 1

MPCMM0001 Chassis Management Module Software Technical Product Specification 147