Intel MPCMM0001 manual CMM Failover Sheet 2, CMM Synchronization Sheet 1

Health Events

Table 41. CMM Failover (Sheet 2 of 2)

Event String	Event Code		Event Severity
	Hex	Decimal
“Failover cannot occur because the other CMM is not	0x0E3	227	OK
responding over its management bus.”
“Failover cannot occur because the critical items have not been	0x0E4	228	OK
synced.”
“Failover cannot occur because the other CMM has a bad	0x0E5	229	OK
hardware signal.”
“Failover occurred because the active CMM had older firmware	0x0F0	240	OK
than the newly active CMM."
“Failover cannot occur because the Standby is not present.”	0x0F1	241	OK
“Failover cannot occur because the standby has an older version	0x0F2	242	OK
of the firmware.”
“Failover cannot occur because the Standby failover state	0x0F3	243	OK
discovery is not finished.”
"Failover occurred because it was initiated by Process	0x018F	399	OK
Monitoring."

Table 42. CMM Synchronization (Sheet 1 of 2)

Event String	Event Code		Event Severity
	Hex	Decimal
“Could not copy the /etc/CMM.cfg file to the standby CMM."	0x0E6	230	OK
“Could not copy the /etc/passwd and /etc/shadow files to the	0x0E7	231	OK
standby CMM.”
“Default password files synced to active CMM. Passwords have	0x0E8	232	OK
been reset to default.”
“Could not copy the /etc/sel_* files to the standby CMM.”	0x0E9	233	OK
“Could not copy the /etc/snmpd.conf and /etc/var/snmpd.conf	0x0EA	234	OK
files to the standby CMM.”
“Could not copy the SDR file to the standby CMM.”	0x0EB	235	OK
“Could not copy the /etc/scripts directory to the standby CMM.”	0x0EC	236	OK
“All files successfully synced.”	0x0ED	237	OK
"Could not copy the PmsSync.ini file to the standby CMM."	0x0EE	238	OK
“Could not copy the cmm.ini file to the standby CMM.”	0x0F4	244	OK
“Could not copy the command privilege file to the standby CMM.”	0x0F5	245	OK
“Could not copy the command prompt file to the standby CMM.”	0x0F6	246	OK
“Could not copy the login message files to the standby CMM.”	0x0F7	247	OK
“Could not copy the SDR repository information to the standby	0x0F8	248	OK
CMM.”
“Could not copy the EKEY information to the standby CMM.”	0x0F9	249	OK
“Could not copy the power and hotswap information to the	0x0FA	250	OK
standby CMM.”

116MPCMM0001 Chassis Management Module Software Technical Product Specification