Siemens S223, S323 user manual Activate the port mirroring, using the following command, Egress

User Manual	UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5

Fig. 5.2 Port Mirroring

To configure port mirroring, designate mirrored ports and monitor port. Then enable port mirroring function. Monitor port should be connected to the watch program installed PC. You can designate only one monitor port but many mirrored ports for one switch.

Step 1

Activate the port mirroring, using the following command.

Command	Mode	Description
mirror enable	Bridge	Activates port mirroring.

Step 2

Designate the monitor port, use the following command.

Command	Mode	Description
mirror monitor {PORTS I cpu}	Bridge	Designates the monitor port.

Step 3

Designate the mirrored ports, use the following command.

Command	Mode	Description
mirror add PORTS [ingress		Designates the mirrored ports.
	Bridge	ingress: ingress traffic
egress]
		egress: egress traffic

A50010-Y3-C150-2-7619 81