Siemens S223, S323 user manual Displaying User Connecting to System, MAC Table, SWITCH# traceroute

User Manual	UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5

The following is an example of tracing packet route sent to 10.2.2.20.

SWITCH# traceroute 10.2.2.20

traceroute to 10.2.2.20 (10.2.2.20), 30 hops max, 38 byte packets 1 10.2.2.20 (10.2.2.20) 0.598 ms 0.418 ms 0.301 ms

SWITCH#

6.3.4Displaying User Connecting to System

To display current users connecting to the system from a remote place or via console in- terface, use the following command.

Command	Mode	Description
where	Enable	Shows current users connecting to the system from a
		remote place or via console interface.

The following is an example of displaying if there is any accessing user from remote place.

SWITCH# where

admin at ttyp0 from 10.20.1.32:2196 for 30 minutes 35.56 seconds admin at ttyS0 from console for 28 minutes 10.90 seconds

SWITCH#

6.3.5MAC Table

To display MAC table recorded in specific port, use the following command.

Command	Mode	Description
	Enable	Shows MAC table.
show mac BRIDGE [PORTS]	Global
		BRIDGE: bridge name
	Bridge

The following is an example of displaying MAC table recorded in default.

SWITCH(config)# show mac 1

portmac addrpermission in use

==================================================================

eth01	00:0b:5d:98:92:da	OK	16.62
eth01	00:14:c2:d9:8a:b5	OK	56.62
eth01	00:01:02:50:d6:b9	OK	72.62
eth01	00:0d:9d:8c:00:ee	OK	72.62
eth01	00:15:00:39:4d:2e	OK	92.62
eth01	00:0e:e8:8b:24:ae	OK	115.48
eth01	00:14:c2:d9:4c:f0	OK	115.48
eth01	00:0b:5d:53:4d:96	OK	124.62
eth01	00:13:20:4b:05:af	OK	132.62
eth01	00:0e:e8:f0:b3:63	OK	152.62
(skipped)

SWITCH(config)#

A50010-Y3-C150-2-7619 99