Electrical connection U.K | Miele WT2789iWPM guide

Installation and connection

Electrical connection U.K.

All electrical work should be carried out by a suitably qualified and competent person, in strict accordance with current national and local safety regulations (BS 7671 in the UK).

Ensure power is not supplied to the appliance until after installation work has been carried out.

The appliance is supplied with a mains cable with moulded plug ready for connection to a 230-240V mains supply.

Please ensure the connection data quoted on the data plate match the household mains supply.

Connection should be made via a suitable switched socket which is easily accessible after installation.

For extra safety it is advisable to protect the appliance with a suitable residual current device (RCD). Contact a qualified electrician for advice.

Do not connect via an extension lead. Extension leads do not guarantee the required safety of the appliance (e.g. danger of overheating).

Non-rewireable plugs BS 1363

The fuse cover must be refitted when changing the fuse, and if the fuse cover is lost, the plug must not be used until a suitable replacement is obtained. The colour of the correct replacement cover is that of the coloured insert in the base of the plug, or the colour that is embossed in words on the base of the plug (as applicable to the design of plug fitted).

Replacement fuses should be ASTA approved to BS 1362 and have the correct rating. Replacement fuses and fuse covers may be purchased from your local electrical supplier.

WARNING: THIS APPLIANCE MUST BE EARTHED

79

Image 79

Miele WT2789iWPM operating instructions Electrical connection U.K, Non-rewireable plugs BS

Contents

Operating instructions Washer-dryer WT 2789 i WPM Disposal of the packing material Caring for the environmentDisposal of your old machine Contents Contents Contents Correct application Safety with children Technical safety Page Correct use Page Page Accessories Programme selector Guide to the machineControl panel PC / Optical interface To wash and dry in a continuous sequence Display Reminder to remove transport bars Before using for the first timeSetting the language Setting the time of day Calibrating the load size sensor to zero Running your first programme Detergent When drying straight after washingWashing and drying environmentally and economically Energy and water consumption Separate washing Short instructionsSort the laundry Select a programme Switch the machine on Load the drum Select Extra options 100% Add detergent After washing a full load Select Delay startRemove the laundry when the programme has finished Start the programme Further extras Extra options Adding or removing laundry after a programme has started To omit the spin between rinses and the final spin Final spin speedRinse and interim spin To omit the final spin Rinse hold Programme chart Sportswear Cold to 60C Max. load 2.0 kg Automatic plus Cold to 40C Max. load 4.5 kgDark garments Cold to 40C Max. load 3.0 kg Delicates * cold to 60C Max. load 1.5 kg Hygiene 30 to 95C Max. load 5.5 kg Outerwear Cold to 40C Max. load 2.0 kgProofing 40C Max. load 2.0 kg Soft toys Cold to 40C Max. load 1.0 kg Separate rinse Max. load 5.5 kg Silks Cold to 30C Max. load 1.0 kgPillows Cold to 95C Pillows 40x80 cm or Pillow 80x80 cm Curtains Cold to 40C Max. load 1.0 kg Main wash Rinses Spin Programme sequence Special features in the programme sequences Detergent Water softeners Right amount to dispense will depend on the followingWashing with several components Adding fabric conditioner or liquid starch separately Fabric conditioner and liquid starchColour run and dye removers/dyes Tips on drying Separate drying Switch the washer-dryer on Select a programme End of the programme unload the drum Close the drum door Thermospin Low temperature Adding or removing laundry after a programme has started Normal+, Normal**, Hand iron, Smoothing+1, Timed drying2 Cottons Max. load 3.0 kg Extra dry, Normal+, NormalWoollens Max. load 1.0 kg Minutes Freshen up Max. load 1.0 kg Warm air Max. load 3.0 kg Timed drying2 Smoothing Max. load 3.0 kg Soft toys Max. load 1.0 kg Timed drying2 Proofing Max. load 1.5 kg Normal Cool air Max. load 3.0 kg Timed drying2 Hygiene Max. load 3.0 kg NormalSilks Max. load 1.0 kg Minutes Pillows Pillows 40x80 cm or 1 pillow 80x80 cm Timed drying2 Drying Washing and drying in a continuous sequence Washing and Drying Close the drum door Add detergent After each washing or drying programme Rinse out fluff programme Interrupting a programme To cancel a programmeAltering the temperature Changing the programme sequence Altering the drying level / drying time Changing the spin speed Safety lockTo activate the safety lock To deactivate the safety lock Cancelling delay start Delay startTo begin Delay start Altering Delay start Cleaning the detergent dispenser drawer Cleaning and careCleaning the drum Hygiene info Cleaning the machine Cleaning the detergent dispenser drawer housing Cleaning the porthole glass Cleaning the filter in the water inlet Programme does not start Problem solving guide Message Possible cause Remedy Fault message appears in the display Problems with the load size indicator General problems An unsatisfactory wash result An unsatisfactory drying result Drum door cannot be opened by pressing the Door button Opening the drum door Drain the machine Cleaning the drain filter Optional accessories After sales serviceFuture updates PC Guarantee Front view Installation and connection Rear view Installing the washer-dryer Installation surfaceRemoving the transit fittings Installation and connection Re-fitting the transit bars Levelling the machine Building under a continous worktop / in a kitchen run Niche height Accessory Removing the spacer bars Spacer bars Fitting the front panel Front panel dimensionsFitting the front panel Preparing the front panel Fitting a door front panel made by another manufacturerWith spacer bars Without spacer bars Preparing the fixing points Plinth facing dimensionsInstallation Fitting a plinth facing Drain hose Electronic unit and machine housingMiele water protection system Inlet hose Connection to the water supply Maintenance and careExtension hose Drain hose connection Connection to the drainage system Electrical connection U.K Non-rewireable plugs BS Washing and Drying Consumption data Technical data Language Settings menuBuzzer Standby display Temperature unitTime Brightness / Contrast Memory Lock code Gentle action Longer pre-wash CottonsDistribution controller Extended cool down Drying levels Anti-crease CareCollection Optional accessories Fabric conditioner UltraWhite detergentUltraColor detergent for coloured garments Liquid detergent for DelicatesPage Page Page 8QLWHG.LQJGRP