Problem solving guide
With the help of the following notes, minor faults in the performance of this machine, some of which may result from incorrect operation, can be put right without contacting the Service Department.
Repair work to electrical appliances should only be carried out by a suitably qualified person in strict accordance with current local and national safety regulations. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work.
The programme does not start
Problem | Possible cause | Remedy |
The display remains | There is no power to | Check whether |
dark and the | the machine. | – the mains plug is plugged |
programme selector is |
| in and switched on. |
not lit up. |
| – the fuse or circuit breaker |
|
| |
|
| has tripped. |
You are asked to enter | Access via a code has | Enter the code and confirm |
a code. | been activated. See | the entry. Deactivate the code |
| the Settings menu. | if you do not wish this |
|
| message to appear in the |
|
| display the next time the |
|
| machine is switched on. |
|
|
|
The programme does | The machine has not | Prepare the machine as |
not start when Drain/ | been prepared for | described in "Before using for |
Spin has been | using for the first time. | the first time". |
selected. |
|
|
The display is dark. | The display has | Press a button. The machine |
| switched off | comes out of standby mode. |
| automatically to save |
|
| energy (Standby |
|
| mode). |
|
|
|
|
56
