Installation and connection
The Miele water protection system
The Miele water protection system protects machine from water damage.
The system consists of three main components:
1)the inlet hose
2)the electronic unit and the machine housing
3)the drain hose
1) Inlet hose
–The inlet hose is tested to withstand pressure of more than 14,000 kPa.
–It has a protective sleeve which is made from metal to protect the hose from damage.
2)Electronic unit and machine housing
–Sump
Any leaking water is collected in a sump in the base of the machine. A float switches off the safety valves, preventing any more water flowing into the machine and water in the suds container is pumped away.
–Overflow protection
This prevents the maching taking in too much water. If the water level exceeds a certain level, the drain pump switches in and pumps the excess water away.
3)Drain hose
The drain hose is protected by a ventilation system which prevents the machine from being emptied completely.
76
