Before using for the first time | Miele WT2789iWPM instruction

Before using for the first time

Before using the machine for the first time ensure that it is correctly installed and connected. Also check that the drain filter is securely tightened to prevent the risk of water leakage during use. See "Installation and connection".

This washer-dryer has undergone a complete functional test at the factory and there will be some residual water in the drum from this process.

The washer-dryer has a sensor which measures the amount of laundry in the drum. This determines the amount of detergent required. To allow the load size indicator to function correctly, you must first run a wash programme without any laundry and without detergent.

Open the stopcock.

Press the button.

If the machine is being switched on for the first time, the Miele Willkommen welcome screen will appear.

The welcome screen will not appear again once a programme lasting longer than 1 hour has been completed.

After a few seconds the display will change to show the screen for selecting your language.

Setting the language

Language


deutsch
english

Use the and buttons to select the language you want and confirm your selection by pressing the OK button.

Setting the time of day

The display for setting the time will then appear.

Time

12:00

Set the hour with the and buttons and confirm your setting by pressing the OK button. Then do the same to set the minutes.

After you have confirmed the minute setting, the display will change to show the reminder to remove the transport bars.

Reminder to remove transport bars

To avoid the risk of damage, the transport bars must be removed before the washer-dryer is used for the first time. See "Installation and connection" for instructions on how to do this.

After removing the transport bars (if this has not already been done by your fitter) press the OK button.

16

Image 16

Miele WT2789iWPM operating instructions Before using for the first time, Setting the language, Setting the time of day

Contents

Operating instructions Washer-dryer WT 2789 i WPM Disposal of the packing material Caring for the environmentDisposal of your old machine Contents Contents Contents Correct application Safety with children Technical safety Page Correct use Page Page Accessories Guide to the machine Control panelPC / Optical interface Programme selector Display To wash and dry in a continuous sequence Before using for the first time Setting the languageSetting the time of day Reminder to remove transport bars Running your first programme Calibrating the load size sensor to zero When drying straight after washing Washing and drying environmentally and economicallyEnergy and water consumption Detergent Separate washing Short instructionsSort the laundry Switch the machine on Select a programme Select Extra options Load the drum Add detergent 100% Select Delay start Remove the laundry when the programme has finishedStart the programme After washing a full load Extra options Further extras Adding or removing laundry after a programme has started Final spin speed Rinse and interim spinTo omit the final spin Rinse hold To omit the spin between rinses and the final spin Programme chart Automatic plus Cold to 40C Max. load 4.5 kg Dark garments Cold to 40C Max. load 3.0 kgDelicates * cold to 60C Max. load 1.5 kg Sportswear Cold to 60C Max. load 2.0 kg Outerwear Cold to 40C Max. load 2.0 kg Proofing 40C Max. load 2.0 kgSoft toys Cold to 40C Max. load 1.0 kg Hygiene 30 to 95C Max. load 5.5 kg Silks Cold to 30C Max. load 1.0 kg Pillows Cold to 95C Pillows 40x80 cm or Pillow 80x80 cmCurtains Cold to 40C Max. load 1.0 kg Separate rinse Max. load 5.5 kg Programme sequence Main wash Rinses Spin Special features in the programme sequences Detergent Water softeners Right amount to dispense will depend on the followingWashing with several components Adding fabric conditioner or liquid starch separately Fabric conditioner and liquid starchColour run and dye removers/dyes Separate drying Tips on drying Switch the washer-dryer on Select a programme Close the drum door End of the programme unload the drum Low temperature Thermospin Adding or removing laundry after a programme has started Normal+, Normal**, Hand iron, Smoothing+1, Timed drying2 Cottons Max. load 3.0 kg Extra dry, Normal+, NormalWoollens Max. load 1.0 kg Minutes Freshen up Max. load 1.0 kg Smoothing Max. load 3.0 kg Warm air Max. load 3.0 kg Timed drying2 Proofing Max. load 1.5 kg Normal Soft toys Max. load 1.0 kg Timed drying2 Hygiene Max. load 3.0 kg Normal Silks Max. load 1.0 kg MinutesPillows Pillows 40x80 cm or 1 pillow 80x80 cm Timed drying2 Cool air Max. load 3.0 kg Timed drying2 Drying Washing and Drying Washing and drying in a continuous sequence After each washing or drying programme Close the drum door Add detergent Rinse out fluff programme To cancel a programme Altering the temperatureChanging the programme sequence Interrupting a programme Changing the spin speed Safety lock To activate the safety lockTo deactivate the safety lock Altering the drying level / drying time Delay start To begin Delay startAltering Delay start Cancelling delay start Cleaning and care Cleaning the drum Hygiene infoCleaning the machine Cleaning the detergent dispenser drawer Cleaning the detergent dispenser drawer housing Cleaning the filter in the water inlet Cleaning the porthole glass Problem solving guide Programme does not start Fault message appears in the display Message Possible cause Remedy Problems with the load size indicator General problems An unsatisfactory wash result An unsatisfactory drying result Drum door cannot be opened by pressing the Door button Drain the machine Opening the drum door Cleaning the drain filter After sales service Future updates PCGuarantee Optional accessories Installation and connection Front view Rear view Installing the washer-dryer Installation surfaceRemoving the transit fittings Installation and connection Levelling the machine Re-fitting the transit bars Niche height Accessory Building under a continous worktop / in a kitchen run Spacer bars Removing the spacer bars Fitting the front panel Front panel dimensionsFitting the front panel Preparing the front panel Fitting a door front panel made by another manufacturerWith spacer bars Without spacer bars Plinth facing dimensions InstallationFitting a plinth facing Preparing the fixing points Electronic unit and machine housing Miele water protection systemInlet hose Drain hose Connection to the water supply Maintenance and careExtension hose Connection to the drainage system Drain hose connection Non-rewireable plugs BS Electrical connection U.K Consumption data Washing and Drying Technical data Language Settings menuBuzzer Temperature unit TimeBrightness / Contrast Standby display Lock code Memory Gentle action Longer pre-wash CottonsDistribution controller Drying levels Anti-crease Extended cool down Optional accessories CareCollection UltraWhite detergent UltraColor detergent for coloured garmentsLiquid detergent for Delicates Fabric conditionerPage Page Page 8QLWHG.LQJGRP