Warning and Safety instructions

Technical safety

￿Before setting up the washer-dryer, check it for any externally visible damage.

Do not install or use a damaged machine.

￿Before connecting the washer-dryer, ensure that the connection data on the data plate (voltage and connected load) match the mains electricity supply. If in any doubt, consult a qualified electrician.

￿The electrical safety of this washer-dryer can only be guaranteed when correctly earthed. It is most important that this basic safety requirement is observed and regularly tested, and where there is any doubt the household wiring system should be inspected by a qualified electrician. The manufacturer cannot be held liable for the consequences of an inadequate earthing system (e.g. electric shock).

￿Do not connect the washer-dryer to the mains electricity supply by an extension lead. Extension leads do not guarantee the required safety of the machine (e.g. danger of overheating).

￿Unauthorised repairs could result in unforeseen dangers for the user, for which the manufacturer cannot accept liability. Repairs should only be undertaken by a Miele approved service technician, otherwise any subsequent damage will not be covered by the guarantee.

￿Please observe the instructions in "Installation and connection" and "Technical data".

￿The socket must be easily accessible after installation in order to disconnect the washer-dryer from the electricity supply.

8

Page 8
Image 8
Miele WT2789iWPM operating instructions Technical safety