WASHING

￿Add detergent

The detergent dispenser display will now appear.

Detergent

￿100%

The percentage shown relates to the amount of detergent recommended by the manufacturer on the packaging.

40%

Add slightly less than half the

 

recommended amount . . .

50%

Add half the recommended

 

amount . . .

60%

Add slightly more than half the

 

recommended amount . . .

75%

Add three quarters of the

 

recommended amount . . .

100%

Add the recommended amount

You also need take the level of soiling and water hardness into account.

Too little detergent results in:

Laundry not getting properly clean and with time it may become grey and hard to the touch.

Greasy particles clinging to laundry.

Limescale deposits on the heater elements.

Too much detergent results in:

Excessive foam which causes a low level of agitation and poor wash, rinse and spin results.

High water consumption (an additional rinse cycle will automatically switch in).

– A burden to the environment.

￿Pull out the detergent drawer and add detergent to the compartments as follows:

￿= Detergent for the pre-wash

(1/3 of the total amount recommended).

￿= Detergent for the main wash including Soak, if selected

￿= Fabric conditioner or liquid starch

￿Close the detergent drawer.

See "Detergent" for further information.

22

Page 22
Image 22
Miele WT2789iWPM operating instructions Add detergent, 100%