Problem solving guide
A fault message appears in the display
| Message | Possible cause |
| Remedy | |
|
|
|
| ||
| Fault | – The water outlet is | – Clean the drain filter and | ||
Check drainage | blocked or |
| the drain pump as | ||
| system | restricted. |
| described in "Problem | |
|
|
| |||
|
| – The drain hose has |
| solving guide – Opening | |
|
| been fixed too high. |
| the drum door in the | |
|
|
|
| event of a blocked drain | |
|
|
|
| outlet and/or power | |
|
|
|
| failure". | |
|
|
| – | The maximum delivery | |
|
|
|
| head is 1 m. | |
|
|
|
| ||
Fault | The water inlet is | Check whether | |||
Water intake | blocked or restricted. | – | the stopcock is opened | ||
Open stopcock | |||||
|
|
| wide enough. | ||
|
|
|
| ||
|
|
| – | the inlet hose is kinked. | |
|
|
| – | If the fault message | |
|
|
|
| appears again, contact | |
|
|
|
| the Miele Service Dept. | |
Waterproof system | The water protection | – | Close the stopcock. | ||
activated | system has reacted. | – | Contact the Miele Service | ||
Close the stopcock | |||||
|
|
| Department. | ||
|
|
|
| ||
Technical fault | There is a fault. | Start the programme again. | |||
Call Service. |
| If the fault message | |||
|
|
| appears again, contact the | ||
|
|
| Miele Service Department. | ||
|
|
| |||
Check detergent | Excessive foam has | Use less detergent next | |||
|
| built up during | time and follow the | ||
|
| washing. | manufacturer's instructions | ||
|
|
| on dosage given on the | ||
|
|
| packaging. | ||
Hygiene info | See "Cleaning the drum (Hygiene info)" in "Cleaning | ||||
|
| and care" for further information. | |||
|
|
|
|
| |
To delete the message from the display switch the machine off using the On/Off button .
57
