Siemens S323 Creating available Static Route only for RIP, Redistributing Routing Information

UMN:CLI			User Manual
			SURPASS hiD 6615 S223/S323 R1.5
	Command	Mode	Description
	ip rip receive version 1		Receives RIP v1 type packet only from the interface.
	ip rip receive version 2	Interface	Receives RIP v2 type packet only from the interface.
	ip rip receive version 1 2		Receives both RIP v1 and RIP v2 type packets from
			the interface.
	To delete the configuration that receives RIP version packet from the interface, use the
	following command.
	Command	Mode	Description
	no ip rip receive version 1		Deletes the configuration of RIP v1 type	packet	for
			helping them be received from the interface.
	no ip rip receive version 2		Deletes the configuration of RIP v2 type	packet	for
		Interface	helping them to be received from interface.
			Deletes the configuration of both RIP v1 and RIP v2
	no ip rip receive version 1 2		type packets for helping them to be received from the
			interface.

10.3.4Creating available Static Route only for RIP

This feature is provided only by Siemens’ route command creates static route available only for RIP. If you are not familiar with RIP protocol, you would better use redistribute static command.

Command	Mode	Description
		Creates suitable static route within RIP environment
route A.B.C.D/M		only.
	Router	A.B.C.D/M: IP prefix
no route A.B.C.D/M		Deletes this static route established by route com-
		mand.

10.3.5Redistributing Routing Information

The hiD 6615 S323 can redistribute the routing information from a source route entry into the RIP tables. For example, you can instruct the router to re-advertise connected, kernel, or static routes as well as other routes established by routing protocol. This capability ap- plies to all the IP-based routing protocols.

To redistribute routing information from a source route entry into the RIP table, use the following command.

364 A50010-Y3-C150-2-7619