Siemens S323, S223 user manual Deleting MAC Filter Policy, Listing of MAC Filter Policy

UMN:CLI			User Manual
			SURPASS hiD 6615 S223/S323 R1.5
	Command	Mode	Description
	mac-filter add MACADDR	Bridge	Allows or blocks packet which brings configured mac
	{deny permit}		address to specified port.

Variable MAC-ADDRESS is composed of twelve digits number in Hexa decimal. It is pos- sible to check it by using the show mac command. 00:d0:cb:06:01:32 is an example of MAC address.

7.12.3Deleting MAC Filter Policy

To delete MAC filtering policy, use the following command.

Command	Mode	Description
mac-filter del SOURCE-MACADDR	Bridge	Deletes filtering policy for specified MAC address.
[<1-4094>]

To delete MAC filtering function, use the following command.

Command	Mode	Description
no mac-filter	Bridge	Deletes all MAC filtering functions.

7.12.4Listing of MAC Filter Policy

If you need to make many MAC filtering policies at a time, it is hard to input command one by one. In this case, it is more convenient to save MAC filtering policies at “/etc/mfdb.conf” and display the list of MAC filtering policy. To view the list of MAC filtering policy at /etc/mfdb.conf, use the following command.

Command	Mode	Description
mac-filter list	Bridge	Shows the list of MAC filtering policy at /etc/mfdb.conf.

7.12.5Displaying MAC Filter Policy

To show a configuration about MAC filter policy, use the following command.

Command	Mode	Description
show mac-filter default-policy	Enable / Global / Bridge	Shows MAC filter policy.
show mac-filter

164 A50010-Y3-C150-2-7619