Siemens S323 Useful Tips, Listing Available Commands, Variables following after the commands

UMN:CLI	User Manual
	SURPASS hiD 6615 S223/S323 R1.5

3.2Useful Tips

This section provides useful functions for user’s convenience while using CLI commands. They are as follow.

• Listing Available Commands

• Calling Command History

• Using Abbreviation

• Using Command of Privileged EXEC Enable Mode

• Exit Current Command Mode

3.2.1	Listing Available Commands
	To list available commands, input question mark <?>. When you input the question mark
	<?> in each command mode, you can see available commands used in this mode and
	variables following after the commands.
	The following is the available commands on Privileged EXEC Enable mode of the hiD
	6615 S223/S323.
	SWITCH# ?
	Exec commands:
	clear	Reset functions
	clock	Manually set the system clock
	configure	Enter configuration mode
	copy	Copy from one file to another
	debug	Debugging functions (see also 'undebug')
	disconnect	Disconnect user connection
	enable	Turn on privileged mode command
	erase	Erase saved configuration
	exit	End current mode and down to previous mode
	halt	Halt process
	help	Description of the interactive help system
	no	Negate a command or set its defaults
	ping	Send echo messages
	quote	Execute external command
	rcommand	Management stacking node
	release	Release the acquired address of the interface
	reload	Reload the system
	renew	Re-acquire an address for the interface
	restore	Restore configurations
	show	Show running system information
	ssh	Configure secure shell
	tech-support	Technical Supporting Function for Diagnosis System
	(ommitted)
	SWITCH#

i

Question mark <?> will not be seen in the screen and you do not need to press <ENTER> key to display commands list.

If you need to find out the list of available commands of the current mode in detail, use the following command.

36 A50010-Y3-C150-2-7619