Siemens S223, S323 Enabling Transmission of Candidate RP Message, A50010-Y3-C150-2-7619 309

User Manual	UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5

decide which IP address to be used as candidate-RP. This command is used to statically configure the RP address for multicast groups.

To configure IP address to be used in candidate-RP, use the following command.

Command	Mode	Description
		Configures RP address for multicast groups statically.
ip pim rp-address A.B.C.D [<1-		A.B.C.D: IP address
	Global	1-99: IP standard access list
99> <1300-1999>] [override]
		1300-1999: IP standard access list (expanded range)
		override: override dynamically RP mappings

•If RP-address configured through BSR and RP-address configured statically are both available for a group range, the RP-address configured through BSR is chosen.

•If multiple static-RPs are available for a group range, then one with the highest IP address is chosen.

To delete configured IP address, use the following command.

Command	Mode	Description
no ip pim rp-address A.B.C.D	Global	Deletes configured IP address.

9.3.4.2Enabling Transmission of Candidate RP Message

Use this command to give the router the candidate RP status using the IP address of the specified interface.

Command	Mode	Description
		Configures a message for a candidate RP.
ip pim rp-candidate INTERFACE		INTERFACE: interface name
[group-list <1-99>] [interval <1-	Global	1-99: IP standard access list
16383>] [priority <0-255>]		1-16383: advertisement interval (unit: second)
		0-255: priority value

To delete configured priority of candidate-RP, use the following command.

Command	Mode	Description
no ip pim rp-candidate		Unconfigures the entire setting of candidate-RP.
no ip pim rp-candidate		Deletes the setting of candidate-RP of specific inter-
INTERFACE	Global	face.
no ip pim rp-candidate
INTERFACE group-list <1-99>

A50010-Y3-C150-2-7619 309