Siemens S223, S323 Maximum Number of RIP Routes, RIP Network Timer, Update, Timeout, Garbage

User Manual	UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5

To add the value of routing metrics, use the following command.

Command	Mode	Description
		Add an offset to incoming or outgoing metrics to routes
offset-list ACCESS-LIST{in out}		learned via RIP.
	Router	ACCESS-LIST: access list name
<0-16> [INTERFACE]
		0-16: type number
		INTERFACE: interface name

Command	Mode	Description
no offset-list ACCESS-LIST{in	Router	Removes an offset list.
out} <0-16> [INTERFACE]

10.3.10Maximum Number of RIP Routes

You can set the maximum number of RIP routes for using on RIP protocol. To set the maximum number of routes, use the following command.

Command	Mode	Description
		Sets the maximum number of routes of RIP.
maximum prefix <1-65535> [1-		1-65535: maximum number of RIP routes
100]	Router	1-100: percentage of maximum routes to generate a
		warning (default: 75)
no maximum prefix <1-65535>		Removes the maximum number of routes of RIP which
[1-100]		are set before.

10.3.11RIP Network Timer

Routing protocols use several timers that determine such variables as the frequency of routing updates, the length of time before a route becomes invalid, and other parameters. You can adjust these timers to tune routing protocol performance to better your internet needs. The default settings for the timers are as follows.

•Update

The routing information is updated once every 30 seconds. This is the fundamental timing parameter of the routing protocol. Every update timer seconds, the RIP proc- ess is supposed to send the routing table to all neighboring RIP routers.

•Timeout

The default is 180 seconds. It’s the interval of time in seconds after which a route is declared invalid. However, this information will be still written in routing table until the neighbor routers are notified that this route is removed from the routing table.

•Garbage

The invalid information of route is deleted on the routing table every 120 seconds. Once the information of route is classified as “invalid”, it’s eventually removed from the routing table after 120 seconds.

A50010-Y3-C150-2-7619 369