Siemens S223, S323 Event Description, Subject of Rmon Event, Event Type, Activating Rmon Event

User Manual			UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
	To configure community for trap message transmission, use the following command.
	Command	Mode	Description
			Configures password for trap message transmission
	community NAME	RMON	right.
			NAME: community name

7.4.3.2Event Description

It is possible to describe event briefly when event is happened. However, the description will not be automatically made. Thus administrator should make the description.

To make a description about event, use the following command.

Command	Mode	Description
description DESCRIPTION	RMON	Describes the event.
		Max: 126 character

7.4.3.3Subject of RMON Event

You need to configure event and identify subject using various data from event. To identify subject of RMON event, use the following command.

Command	Mode	Description
		Identifies subject of event. You can use maximum 126
owner NAME	RMON	characters and this subject should be same with the
		subject of RMON alarm.

7.4.3.4Event Type

When RMON event happened, you need to configure event type to arrange where to send event.

To configure event type, use the following command.

Command	Mode
type log
type trap	RMON
type log-and-trap
type none

Description

Configures event type as log type. Event of log type is sent to the place where the log file is made.

Configures event type as trap type. Event of trap type is sent to SNMP administrator and PC.

Configures event type as both log type and trap type.

Configures none event type.

7.4.3.5Activating RMON Event

After finishing all configurations, you should activate RMON event. To activate RMON event, use the following command.

A50010-Y3-C150-2-7619 133