Siemens S223 Information of Snmp Agent, Following is an example of creating 2 Snmp communities

User Manual	UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5

To display a configured SNMP community, use the following command.

Command	Mode	Description
show snmp community	Enable	Shows a created SNMP community.
	Global

The following is an example of creating 2 SNMP communities.

SWITCH(config)# snmp community ro public

SWITCH(config)# snmp community rw private

SWITCH(config)# show snmp community

Community List
Type Community	Source	OID

-----------------------------------------------

ro public rw private

SWITCH(config)#

7.1.2Information of SNMP Agent

You can specify basic information of SNMP agent as administrator, location, and address that confirm its own identity.

To set basic information of SNMP agent, use the following command.

Command	Mode	Description
snmp contact NAME		Sets a name of administrator.
snmp location LOCATION		Sets a location of SNMP agent.
snmp agent-address IP-ADDRESS	Global	Sets an IP address of SNMP agent.
no snmp contact		Deletes specified basic information for
no snmp location
		each item.
no snmp agent-address IP-ADDRESS

The following is an example of specifying basic information of SNMP agent.

SWITCH(config)# snmp contact Brad

SWITCH(config)# snmp location Germany

SWITCH(config)#

To display basic information of SNMP agent, use the following command.

Command	Mode	Description
show snmp contact	Enable	Shows a name of administrator.
show snmp location		Shows a location of SNMP agent.
	Global
show snmp agent-address		Shows an IP address of SNMP agent.

A50010-Y3-C150-2-7619 105