Siemens S223, S323 user manual RIP Version

User Manual	UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5

i

Command	Mode	Description
		Configures a neighbor router to exchange routing in-
neighbor A.B.C.D	Router	formation.
		A.B.C.D: neighbor address
no neighbor A.B.C.D		Deletes the neighbor router.

You can block the routing information to specific interface by using the passive-interfacecommand.

10.3.3RIP Version

Basically, the hiD 6615 S323 supports RIP version 1 and 2. However, you can configure to receive either RIP v1 type packets only or RIP v2 type packets only.

To configure RIP version, use the following command.

Command	Mode	Description
version {1 2}		Selects one type of RIP packets to transmit either RIP
	Router	v1 or RIP v2 type packet
no version {1 2}		Restores the default of specified RIP version type

The preceding task controls default RIP version settings. You can override the routers RIP version by configuring a particular interface to behave differently.

To control which RIP version an interface sends, perform one of the following tasks after opening Interface Configuration mode.

Command	Mode	Description
ip rip send version 1		Sends RIP v1 type packet only to this interface.
	Interface
ip rip send version 2		Sends RIP v2 type packet only to this interface.
ip rip send version 1 2		Sends RIP v1 and RIP v2 type packets both.

To delete the configuration that sends RIP version packet to interface, use the following command.

Command	Mode		Description
no ip rip send version 1		Deletes	the configuration of RIP v1 type packet for
		helping them to be sent to the interface.
no ip rip send version 2	Interface	Deletes the configuration of RIP v2 type packet for
		helping them to be sent to the interface.
no ip rip send version 1 2		Deletes the configuration of both RIP v1 and v2 type
		packets for helping them to be sent to the interface.

Similarly, to control how packets received from an interface are processed, perform one of the following tasks.

A50010-Y3-C150-2-7619 363