Siemens S223, S323 user manual Jumbo-frame Capacity, A50010-Y3-C150-2-7619 275

User Manual			UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
	Command	Mode	Description
	no storm-control {broadcast	Bridge	Disables broadcast, multicast, or DLF storm control
	multicast dlf} [PORTS]		respectively.

To display a configuration of storm control, use the following command.

Command	Mode	Description
	Enable
show storm-control	Global	Displays storm control configuration.
	Bridge

8.12Jumbo-frame Capacity

The packet range that can be capable to accept is from 64 bytes to 1518 bytes. Therefore, packets not between these ranges will not be taken. However, the hiD 6615 S223/S323 can accept Jumbo-frame larger than 1518 bytes through user’s configuration.

To configure to accept Jumbo-frame larger than 1518 bytes, use the following command.

Command	Mode	Description
jumbo-frame PORTS <1518-		Configures to accept jumbo-frame between specified
	Bridge	ranges.
9000>
		1518-9000: Max packet length

To disable configuration to accept Jumbo-frame, use the following command.

Command	Mode	Description
no jumbo-frame PORTS	Bridge	Disables configuration to accept jumbo-frame on speci-
		fied port.

To display the configuration of Jumbo-frame, use the following command.

Command	Mode	Description
	Enable
show jumbo-frame	Global	Shows a configuration of jumbo frame.
	Bridge

Sample Configuration

The following is an example of configuration to accept Jumbo-frame under 2200 bytes in port 1~10.

SWITCH# configure terminal

SWITCH(config)# bridge SWITCH(bridge)# jumbo-frame1-10 2200 SWITCH(bridge)# show jumbo-frame

Name : Current/Default port01 : 2200/ 1518

A50010-Y3-C150-2-7619 275