Siemens S323, S223 user manual 3 QoS, Displaying Rule

UMN:CLI	User Manual
	SURPASS hiD 6615 S223/S323 R1.5

7.6.2.7Displaying Rule

The following command can be used to show a certain rule by its name, all rules of a cer- tain type, or all rules at once sorted by rule type.

Command	Mode	Description
show rule NAME		Shows a rule, enter a rule name.
		NAME: rule name
	Enable
show rule		Shows all rules sorted by type.
	Global
show rule all		Shows all rules and admin access rules sorted by type.
show rule statistics		Shows rule statistics.
show rule-profile	Rule	Shows a current configuration of a rule.

The following is an example of configuring specific rule action on rule profile and showing it.

SWITCH# configure terminal

SWITCH(config)# rule jean create

SWITCH(config-rule[jean])# priority low

SWITCH(config-rule[jean])# match copy-to-cpu

SWITCH(config-rule[jean])# apply

SWITCH(config-rule[jean])# exit

SWITCH(config)# rule jean create

%Already exist rule SWITCH(config)# show rule rule jean

priority low port any any match copy-to-cpu

SWITCH(config)# rule jean modify SWITCH(config-rule[jean])no match copy-to-cpuSWITCH(config-rule[jean]) show rule

rule jean priority low port any any

SWITCH(config-rule[jean])

7.6.3QoS

For hiD 6615 S223/S323, it is possible to use Strict Priority Queuing, Weighted Round Robin and Weighted Fair Queuing for a packet scheduling mode.

The following steps explain how QoS can be configured.

•Scheduling Algorithm

•Qos Weight

•802.1p Priory-to-queue Mapping

•Queue Parameter

•Displaying QoS

146 A50010-Y3-C150-2-7619