Siemens S323 Using Abbreviation, Using Command of Privileged Exec Enable Mode, SWITCH# show clock

UMN:CLI	User Manual
	SURPASS hiD 6615 S223/S323 R1.5

After using these commands in order: show clock → configure terminal → interface 1

→exit, press the arrow key <↑> and then you will see the commands from latest one: exit → interface 1 → configure terminal → show clock.

SWITCHconfig)# exit

SWITCH# show clock

Mon, 5 Jan 1970 23:50:12 GMT+0000

SWITCH# configure terminal

SWITCH(config)# interface 1

SWITCH(config-if)# exit

SWITCH(config)# exit

SWITCH# (press the arow key ↑)

↓

SWITCH# exit (arrow key ↑)

↓

SWITCH# interface 1 (arrow key ↑)

↓

SWITCH# configure terminal (arrow key ↑)

↓

SWITCH# show clock (arrow key ↑)

The hiD 6615 S223/S323 also provides the command that shows the commands used before up to 100 lines.

Command	Mode	Description
show history	Enable	Shows a command history.

3.2.3Using Abbreviation

Most of the commands can be used also with abbreviated form. The following table shows some examples of abbreviated commands.

Command	Abbreviation
clock	cl
exit	ex
show	sh
configure terminal	con te

Tab. 3.13 Command Abbreviation

3.2.4Using Command of Privileged EXEC Enable Mode

You can execute the commands of Privileged EXEC Enable mode as show, ping, telnet, traceroute, and so on regardless of which mode you are located on.

To execute the commands of Privileged EXEC Enable mode on another mode, use the following command.

Command	Mode	Description
do COMMAND	All	Executes the commands of Privileged EXEC mode.

38 A50010-Y3-C150-2-7619