CONFIGURATION

The configuration menus allow you to set certain thermostat operating characteristics to your system or personal requirements.

To enter the User Configuration menu, press PROGRAM RUN to make sure the thermostat is in the run program mode, then press TIME FWD and TIME BACK at the same time. The display will show the first item in the configuration menu.

The following charts (pages 24 & 25) describe each item on the menus. Press TIME FWD to move forward to the next item in the menu or TIME BACK to move backward to the previous item. Set these according to your personal

preference using or . To enter the Keypad Lock menu, while in

the User Menu, press and hold TIME FWD and TIME BACK for at least

two seconds.

To exit either menu and return to normal operation, press PROGRAM RUN . To re-enter to the User menu at any time press PROGRAM RUN , then press TIME FWD and TIME BACK at the same time. While in the menus, if you do not press any buttons for two minutes, the thermostat will revert to normal operation.

23

Configuration

Page 25
Image 25
Emerson 1F92 manual Configuration