Siemens S223, S323 user manual Sample Configuration, Tacacs

Displayed according to priority.

User Manual	UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5

4.2.8Sample Configuration

[Sample Configuration 1] Configuration RADIUS server

The following is an example of configuring authorization method in SURPASS hiD 6615. It is configured to add RADIUS to default method in case of clients connecting through con- sole and telnet. And, the priority is given to RADIUS in case of clients connecting through console and to default method in case of clients connecting through telnet.

Then, show the configuration. And The following is an example of configuring frequency of retransmit and timeout of response after registering RADIUS server.

SWITCH(config)# user add user test1

Changing password for user

Enter the new password (minimum of 5, maximum of 8 characters)

Please use a combination of upper and lower case letters and numbers.

Enter new password:vertex

Re-enter new password:vertex

Password changed.

SWITCH(config)# login local radius enable

SWITCH(config)# login remote radius enable

SWITCH(config)# login local radius primary

SWITCH(config)# login remote host primary

SWITCH(config)# login radius server add 100.1.1.1 1

SWITCH(config)# login radius retransmit 5

SWITCH(config)# login radius timeout 10

SWITCH(config)# show login

[AUTHEN]

Local login : radius host

Remote login : host radius

Accounting mode : both

------------------------------------

[HOST]

maximum_login_counts : 8

------------------------------------

[RADIUS]

<Radius Servers & Key> 100.1.1.1 1

Radius Retries : 5

Radius Timeout : 10

Radius Interface : default

------------------------------------

[TACACS]

<Tacacs Servers & Key> Tacacs Timeout : 3 Tacacs Socket Port : 49 Tacacs Interface : default Tacacs PPP Id : 1

Tacacs Authen Type : ASCII

Tacacs Priority Level : MIN SWITCH(config)#

A50010-Y3-C150-2-7619 55