Siemens S223, S323 user manual Default Alarm Severity, Alarm Severity Criterion

User Manual	UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5

7.1.9.2Default Alarm Severity

To configure a priority of alarm, use the following command.

Command	Mode	Description
snmp alarm-severity default		Configures the priority of alarm.
{critical major minor warning	Global
		(default: minor)
intermediate}

7.1.9.3Alarm Severity Criterion

You can set an alarm severity criterion to make an alarm be shown only in case of se- lected severity or higher. For example, if an alarm severity criterion has been set to major, you will see only an alarm whose severity is major or critical.

To configure alarm-severity criteria in CLI, use the following command.

Command	Mode	Description
snmp alarm-severity criteria		Configures the severity criterion.
{critical major minor warning	Global
		(default: warning)
intermediate}

i

!

The order of alarm severity is critical > major > minor > warning > intermediate.

The alarm severity option is valid only in ACI-E.

A50010-Y3-C150-2-7619 113