Siemens S223, S323 Default Cost of Area, Area 0-4294967295filter-list access LIST-NAMEin out

User Manual	UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5

10.2.6.2Default Cost of Area

The default cost of Area is configured only in ABR. ABR function is for delivering the summary default route to stub area or NSSA, in that cases the default cost of area must be required. However, ABR which does not have stub area or NSSA can not use the fol- lowing command.

To configure a default cost of Area, use the following command.

!

	Command	Mode	Description
area	<0-4294967295> default-	Router	Configures a default cost of Area.
cost	<1-16777215>

To delete a configured default cost of Area, use the following command.

	Command	Mode	Description
area	<0-4294967295> default-	Router	Deletes a configured default cost of Area.
cost	<1-16777215>

This command is only for ABR which is delivering summary default route to stub or NSSA.

10.2.6.3Blocking the Transmission of Routing Information Between Area

ABR transmits routing information between Areas. In case of not to transmit router infor- mation to other area, the hiD 6615 S323 can configure it as a blocking.

First of all, use the access-listor prefix-listcommand to assign LIST-NAME. And use the following command to block the routing information on LIST-NAME. This configuration only available in case of OSPF router is ABR.

To block routing information on LIST-NAME, use the following command.

!

Command Mode Description

area <0-4294967295>filter-list access LIST-NAME{in out}

Router Blocks routing information on LIST-NAME.

area <0-4294967295>filter-list prefix LIST-NAME{in out}

To delete configured blocking information, use the following command.

Command Mode Description

no area <0-4294967295>filter- list access LIST-NAME{in out}

Router Deletes configured blocking information.

no area <0-4294967295>filter- list prefix LIST-NAME{in out}

This command is only available for ABR.

A50010-Y3-C150-2-7619 343