Siemens S323, S223 Port Security Aging, This is an example of configuring port security on port

UMN:CLI	User Manual
	SURPASS hiD 6615 S223/S323 R1.5

To display the configuration of port security, use the following command.

Command	Mode	Description
show port security [PORTS]	Bridge	Shows port security on the port.

This is an example of configuring port security on port 7.

SWITCH(config)# bridge SWITCH(bridge)# port security 7 SWITCH(bridge)# port security 7 maximum 10000 SWITCH(bridge)# port security 7 violation protect

SWITCH(bridge)# port security 7 mac-address00:02:a5:74:9b:17 vlan 1 SWITCH(bridge)# show port security 7

========================================================================

port security violation aging type static maximum current

========================================================================

7 enabled protect - absolute - 10000 1

========================================================================

port vlan secure-mac-addr status in use

========================================================================

7	1	00:02:a5:74:9b:17				static	-
SWITCH(bridge)# no				port	security 7	maximum
SWITCH(bridge)#			no	port	security 7	violation
SWITCH(bridge)#			show port security			7

========================================================================

port security violation aging type static maximum current

========================================================================

7 enabled shutdown - absolute - 1 0

========================================================================

port vlan secure-mac-addr status in use

========================================================================

SWITCH(bridge)#

7.10.2Port Security Aging

Port security aging is to set the aging time for all secure addresses on a port. Use this feature to remove and add PCs on a secure port without manually deleting the existing secure MAC addresses while still limiting the number of secure addresses on a port.

Command		Mode	Description
port security PORTS	aging		Enables aging for configured secure addresses.
static
port security PORTS aging time		Bridge	Configures aging time in minutes for the port. All the
<1-1440>			secure addresses age out exactly after the time.
port security PORTS aging type			Configures aging type.
{absolute inactivity}

•absolute all the secure addresses on this port age out exactly after the time (min- utes) specified lapses and are removed from the secure address list.

•inactivity the secure addresses on this port age out only if there is no data traffic from the secure source addresses for the specified time period.

160 A50010-Y3-C150-2-7619