Siemens S323, S223 Maximum Process of LSA, 360 A50010-Y3-C150-2-7619, Overflow database external

UMN:CLI	User Manual
	SURPASS hiD 6615 S223/S323 R1.5

10.2.18.4Maximum Process of LSA

The hiD 6615 S323 can configures maximum number of LSA to process. LSA is classified as internal route LSA and external route LSA, maximum number of LSA can configure on each class.

And also, If process of LSA is over the configured number, you can configure it to stop the process or send the caution message. When the outer route of LSA is overflowed the as- signed value, you can configure it to restart OSPF after the waiting time. If the waiting time is 0, OSPF keep the process before the administrator reboots the system.

To assign the maximum number of LSA to process in OSPF, use the following command.

Command	Mode	Description
overflow database		Assigns the number of LSA for internal route.
<1-4294967294> [hard soft]
	Router
overflow database external		Assigns the number of LSA for external route.
<0-2147483647> <0-65535>

When there is an overflow, hard configuration will stop the process, and soft configura- tion will send a caution message.

To release the configuration, use the following command.

Command		Mode	Description
no overflow database			Releases the configuration for OSPF internal route.
no overflow database	external
[<0-2147483647>]		Router	Releases the configuration for OSPF external route.
no overflow database	external
<0-2147483647> [<0-65535>]

360 A50010-Y3-C150-2-7619