Siemens S323, S223 user manual Initializing Authentication Status, Applying Default Value

UMN:CLI			User Manual
			SURPASS hiD 6615 S223/S323 R1.5
	the following command.
	Command	Mode	Description
	dot1x reauthenticate PORTS	Global	Implement re-authentication regardless of the config-
			ured time interval.

4.5.3Initializing Authentication Status

The user can initialize the entire configuration on the port. Once the port is initialized, the supplicants accessing to the port should be re-authenticated.

Command	Mode	Description
dot1x initialize PORTS	Global	Initializes the authentication status on the port.

4.5.4Applying Default Value

To apply the default value to the system, use the following command.

Command	Mode	Description
dot1x default PORTS	Global	Applies the default value.

4.5.5Displaying 802.1x Configuration

To display 802.1x configuration, use the following command.

Command	Mode	Description
show dot1x [PORTS]	Enable	Shows 802.1x configuration.
	Global

4.5.6802.1x User Authentication Statistic

To display the statistics about the process of 802.1x user authentication, use the following command.

Command	Mode	Description
show dot1x statistics PORTS	Global	Shows the statistics of 802.1x user authentication on
		the port.

To reset statistics by deleting the statistics of 802.1x user authentication, use the following command.

Command	Mode	Description
dot1x clear statistics PORTS	Global	Makes reset state by deleting the statistics of 802.1x
		on the port.

70 A50010-Y3-C150-2-7619