Canon 3175B002 Conguring the Printer’s AppleTalk Network Settings, Phase, Name *1, Zone *2

Network Setting

Conguring the Printer’s AppleTalk Network Settings

Follow the steps below to congure the AppleTalk network settings.

1. Start the web browser and enter the following URL in the Location (or Address) box to display the RemoteUI page.

http://“printer IP address or name”/

Example: http://xxx.xxx.xxx.xxx/

2. Select Administrator Mode and click Logon.

3. If a password has been set on the printer, enter the password.

4. Click Network in the Device Manager menu at left to display the Network page.

5. Click Edit in the upper-right corner of the AppleTalk group to display the Edit AppleTalk Protocol Settings page.

6. Refer to the AppleTalk Settings Items table to complete the settings.

AppleTalk Settings Items

Item	Details	Default Setting
Phase Type	Specify whether to use AppleTalk.	Disabled
	If you will use AppleTalk, choose
	Phase 2.
	If you will not use AppleTalk,
	choose Disabled.
Name (*1)	Specify the object name used by	Canon NB-17FB (xxxxxx)
	AppleTalk (in up to 31 single-byte
	or 15 double-byte characters).
	However, do not use the following
	single-byte characters: @ * : =
Zone (*2)	Specify the printer zone name, up	*
	to 31 single-byte characters.
	However, do not use the following
	single-bytecharacters: @: =Also
	avoid using “*” (which represents
	the default zone) in the middle of
	a string.

*1:The object name you have specied in Name is displayed in Printer Setup Utility (or Print Center) in Mac OS X. If you use multiple printers in the same zone, assign a unique name to each printer. By default, the network interface name is “Canon NB-17FB (xxxxxx)”. (Here, xxxxxx is the last six digits of the printer’s MAC address.)

*2: If zones have been created on the network, enter the name of the printer’s zone. If there are no zones, leave the asterisk “*” entry (for the default zone) as it is. If you enter a network zone name that does not match created zones, the printer will not be detected by Macintosh computers. Consult your network administrator for information on zone names.

7. Click OK to display the Network page.

Network Setting 489