Canon 3175B002 user manual Conguring the IP Address Using ARP and Ping Commands

Network Setting

Conguring the IP Address Using ARP and PING Commands

This topic describes how to congure the IP address using ARP and PING commands.

To use the ARP and PING commands, you will need to know the printer’s MAC address. You can conrm the MAC address on the Control Panel.

1. Check the printer’s MAC address.

You can conrm the MAC address on the Control Panel as follows:

1.Press the Menu button to display MAIN MENU.

2.Press ▲ or ▼ to select Interface Setup, and then press the ► button.

3.Press ▲ or ▼ to select Ethernet Driver, and then press the ► button.

4.Press ▲ or ▼ to select MAC Address, and then press the ► button.

You can also print information on the printer status, which includes the MAC address, as follows:

1.Press the Menu button to display MAIN MENU.

2.Press ▲ or ▼ to select Test Print, and then press the ► button.

3.Press ▲ or ▼ to select Status Print, and then press the ► button.

4.Press ▲ or ▼ to select Yes, and then press the OK button.

The MAC address is indicated in the printer status information in the following location.

2. In Windows, open a command prompt or MS-DOS prompt, or in Mac OS X, start Terminal.

3. Execute the following command to add entries to the ARP table for managing IP addresses and corresponding MAC addresses.

arp -s [IP address] [the printer’s MAC address you have veried] Example: arp -s xxx.xxx.xxx.xxx 00-00-85-xx-xx-xx

Note

•In Mac OS X when using Terminal, enter the arp command in the format “arp -s xxx.xxx.xxx.xxx 00:00:85:xx:xx:xx”. For details, refer to the help le for the command line.

484 Network Setting