Canon 3175B002 user manual Parts replacement time has passed, Unknown le, Multi-sensor error

Other Messages

Parts replacement time has passed.

Cause	Corrective Action
It is past the recommended time to replace	Contact your Canon dealer for assistance.
consumables for which service is required.

Unknown le.

Cause	Corrective Action
Invalid data format.	Check the print job and resend it.

Calibration There is a problem with the multi-sensor.

Cause	Corrective Action
The performance of a sensor inside the printer may	Press the OK button and cancel calibration. Contact
be impaired.	your Canon dealer for assistance.

Multi-sensor error

Cause	Corrective Action
Direct sunlight or strong lighting may be shining on	Take steps to ensure the printer is not used when
the printer and causing the sensor to malfunction.	exposed to direct sunlight or strong lighting.
The performance of a sensor inside the printer may	Contact your Canon dealer for assistance.
be impaired.

Roll feed unit err

Cause	Corrective Action
The Roll Feed Unit is not working.	Turn off the printer, remove the Roll Feed Unit
	momentarily, and then reinstall it.
	(→P.146)
	(→P.147)
	If the message is still displayed after you do this,
	contact your Canon dealer for assistance.

No Roll Feed Unit.

Cause	Corrective Action
The printer has received a print job that species	Install the Roll Feed Unit and resend the print job.
rolls, but the Roll Feed Unit is not installed.	(→P.147)

Error Message 707