Printing procedure

Loading and Printing on Rolls

These are the basic steps for loading and printing on rolls.

Follow these steps to switch to a new roll or a roll of a different type or width before printing.

Note

If a sheet is loaded in the Top Paper Feed Slot, remove it before this procedure. (→P.145)

Before printing banners or other long documents, spread a clean cloth or paper on the oor or use the Output Stacker to prevent the printed surface from becoming dirty from the oor after printing.

If you will wait for the ink to dry after printing and simply eject the document, you can deactivate automatic cutting and print a cut line instead. (→P.135)

1.Turn the printer on. (→P.27)

2. Select a roll as the paper source. (→P.116)

Basic Printing Workow 93

Page 107
Image 107
Canon 3175B002 user manual Loading and Printing on Rolls