Minelab Mine lab Explorer IITM, P0591-A Audio Response, Pitch of response, Adjusting the volume

	THE MINELAB EXPLORER II
AUDIO RESPONSE
The Explorer II emits a target audio response that varies in pitch and volume depending
on what type of object it detects.
	Pitch of response
	Figure 5.13
	Generally, a target that is highly conductive (e.g. a large silver
	coin) emits a high pitched signal. A low pitch is sounded for less
	conductive targets. Large targets or targets close to the ground
Figure 5.13 Target sounding response	surface emit a louder signal.
	In Quickstart’s preset function, Coins Discrimination, the target
	audio response is emitted if a target is predominantly non-ferrous –
	when the target crosshair is displayed in the clear part of the
	Smartfind screen (Figure 5.13).
	As you detect different targets you will quickly find it easy to
	identify objects by the audio and visual responses of the Explorer II.
	Directions for familiarizing yourself with specific target responses	5
	appear toward the end of this chapter.
Headphones Caution!	Adjusting the volume	QUICKSTART
	The preset volume control on the Explorer II is turned up to
When using headphones, volume	maximum volume. This is usually appropriate with either the
	detector’s built-in speaker or headphones. If the volume is too loud
level should be adjusted to protect
	in the headphones, use the volume control.
your hearing from excessive
sound.	Main Menu > Audio > Volume > Max. Limit can be set to reduce
	potentially loud signals (see page 54).
		51
	AUDIO RESPONSE