Minelab P0591-A, Mine lab Explorer IITM manual Phase 3 Rejecting the framed target area

www.minelab.com

THE MINELAB EXPLORER II

... continued	tutorial!
EDITING AND SAVING TARGETS

6

ADVANCED USE

78

Figure 6.11 Rejecting framed target area

Figure 6.12 Target frame dragged to complete discrimination pattern

Figure 6.13 Saving discrimination pattern

PHASE 3: Rejecting the framed target area

STEP 7 (Figure 6.11) To reject the area enclosed by the target frame, press the center left shift button once. You will note that a cross appears next to the button and the area of screen within the target frame has darkened.

(Figure 6.12) It is now possible to drag the target frame to the left to increase the rejected area until it connects to the zone rejected previously.

NOTE To accept the framed area, press the center left shift button until a tick appears next to the button. This instructs the Explorer II to clear the framed area.

PHASE 4: Saving edited discrimination pattern

STEP 8 (Figure 6.13) To save the edited discrimination pattern, press the Main Menu shortcut button and select SAVE from the displayed menu.

STEP 9 Press the shift button corresponding to the location you want to save it (e.g. S2).

STEP 10 Now you can recall your edited discrimination pattern from the SELECT target list.

NOTE The last saved discrimination pattern is retained in

the SELECT menu as Advanced mode’s current setting.

EDITING AND SAVING TARGET PATTERNS