THE MINELAB EXPLORER II
87
ADVANCED USE
6
SETTINGS MENUIntroducing the Settings menu
Figure 6.21
Main Menu > Options > SETTINGS
Once you have selected and modified the detector’s operational
settings (as detailed in Chapters 5 and 6) it is possible to save
them to the Explorer II’s memory for future detecting sessions.
Advanced mode allows you to save and load two different settings
(in addition to the factory presets). It may be that two people with
different preferences use the detector (e.g. different volume, tone,
sensitivity settings) or perhaps you divide your time between a
couple of very different detecting environments (e.g. the beach and
a highly-mineralized battlefield). The Explorer II’s Settings feature
makes it easy to save rather than going through the whole
fine-tuning process again.
Saving and loading a setting
For example, to save your current detector settings, press the shift
button next to USER A or USER B on the right side of the screen. A
screen prompt will appear asking if you want to save current
settings in the memory. Select YES.
You can now proceed to detect with this setting knowing it has been
saved for future use in similar conditions. On the next occasion you
wish to use these preferred settings you can load by choosing
SETTINGS from the Options menu and pressing the shift button next
to the USER A or USER B option on the left side of the screen.
(Continued next page)
Figure 6.21 Settings menu
SETTINGS MENU