Base station Sounds Registration Line settings Service code settings
Navigation reminder :
(Go to) 
(Validate)
(Scroll to) 
(Select)
Setting the base station
Setting the base station sounds
To set the base ringer type
1- Go to Base station, validate
2- Scroll to Sounds, validate
3- Select Ringer type, validate
4- Choose the ringer in the list and validate
To record your personnal melody (Onis 300 Vox)
Resume from step
3- Scroll to Record pers. melody, validate
4- Scroll to Record new melody, validate
5- Press 
to start recording
6- Press again to stop recording
7- Activate this ringer in the above menu
To set the ringer volume level There are 5 ringer volume levels. Resume from step
3- Scroll to Ringer volume, validate
4- Select the appropriate level and validate
To activate/deactivate the music on hold
This feature allows the caller to hear music when the call is put on hold when transfering a call from one handset to another (See page 19).
Resume from step
3- Select Music on hold, validate
4- Select ON/OFF, validate
Note : If the feature is deactivated the caller will hear beeps.
Registration
This feature allows you to register a DECT peripheral without keypad
To register a DECT peripheral 1- Go to Base station, validate
2- Scroll to Enable registration, validate
3- Enter the peripheral code, validate
4- Follow instructions in the peripheral manual (See page 2)
Base station | 27 |
