Programming the Remote Control
_Dv5 Dv
Tile relnote control is preset to operate Sony brand video equipment.
BD (Blu-ray Disc)/DVD 101
DVR/VCR 901 (Sony Dream System)
SAT/CAgLE ..................................................................................................80i (Sony £aieiiiie Rece](,'er 5.....................................
Follow tile steps below to prograln your TV's relnote control tooperate non-
Sony video equipment.
_ " 'S
Find tile three-digit code for your equipment from tile Manufacturer .'
Codes" listed on page 42. If more than one code number is listed, try
entering from the code listed first.
[] Press and hold the _, _ or _ FUNCTION button you want to
prograrn on the rernote control and press the % button simultaneously.
The selected FUNCTION button (BD/DVR, VCR/DVD or
SAT/CABLE) will flash.
[] Enter the three-digit manufacturer's code number using the (_)-(_)
buttons while FUNCTION button is lit. If the code is not entered within
10 seconds, you must start from step 1again.
[] Press the (_) button.
When the prograrnrning is conect, the selected FUNCTION button
flashes twice. When not correct, the button flashes five times.
,F_ While _, _" and _buttons are labeled as suchl you can still
program any of your connected equipment using any oneof the
buttons regardless ofthe label. For example, ......,_button can be
programmed to operate your VCR, If you have a DVD/VCR combo
that you want to operate with your TV remote control, you can
program with the _or _or even the _ ;but remember which
button you have programmed for your particular use.
To check if the code works
Aim your TV's remote control at the equipment, and press the green
button. If the equipment turns on and off, the programming is completed. If
not, try the next code listed.
f_ If no code isinput within the above specified time, or aninvalid or
incorrect code number is input, the remote control automatically
goes back to the previous setting.
Za In some cases, you may not be able to program your remote
control to operate other equipment. In such cases, use the
equipment's own remote control.
_0
"d
41