To set the ringer volume level
There are 5 handset ringer volume levels.
1- Go to Handset, validate
2- Select Sounds, validate
3- Scroll to Ringer volume, validate (the current level is heard) 4- Choose the appropriate volume and validate
To set the earpiece tone
1- Resume from step
3- Scroll to Earpiece tone, validate
4- Choose Standard,Treble or Bass and validate
To set the key & feedback tones
Tones are audio feedbacks heard when pressing the keys, validating a setting. Resume from step
3- Scroll to Key & feedback tones, validate 4- Select ON/OFF, validate
To set the notification beep
The notification beeps are audio indicators heard when there is a new SMS or a message on the voice mailbox.
Resume from step
3- Scroll to Notification beep, validate
4- Select ON/OFF, validate
The babysit mode
This feature allows you to monitor the baby’s room. Place the handset in the room to be monitored and you will hear the noise on the additional handset.
To activate/deactivate the babysit mode 1- Go to Handset, validate
2- Scroll to Babysit mode, validate
3- Select ON/OFF, validate
An intercom is necessary to monitor the room (See page l9). Note :You can still answer a call or make a call with the handset.
Registration
Up to 8 handsets can be registered to the base station. One handset can be associated to 4 base stations. Warning : If you wish to associate non Philips handsets to the Onis 300 base station, make sure that this handset is GAP compliant otherwise it will not operate properly (See page 2).
1- Unplug and plug back in the mains lead to put the base in registration mode
2- With the additional handset, press 
to start the registration
3- Enter the
If successful the additional handset will be named & numbered (Philips2). The attached digit is linked to the registration order.
12 | Handset |
