Operation
Blodgett IQ2T Control
PROGRAMMING MULTIPLE STAGE RECIPES Entering the Programming Mode:
1.Press and hold the PROG KEY (10). The top display reads CodE.
2.Use the product keys to enter the program- ming access code: 3 1 2 4. Press the ENTER KEY (14). The top display reads Prod.
3.Press the desired product key followed by the ENTER KEY (14).
Programming the Cook Time:
NOTE: When multiple stage cooking is being used, the countdown time displayed dur- ing cooking is the sum of all stages.
1.The top display reads P1:__. The bottom dis- play gives the current programmed cook time for stage 1 in minutes:seconds. Press the TOGGLE/CLEAR KEY (11). Use the product keys to enter the new cook time. Press the EN- TER KEY (14) to save the new cook time.
2.The top display reads P2:__. The control is asking for the cook time for the second stage of this recipe. Repeat Step 1 for each addition- al stage.
3.When the cook times for all stages are pro- grammed, press the TOGGLE/CLEAR KEY (11) to clear the bottom display.
NOTE: This tells the controller that there are no more stages for this recipe. Once the number of stages has been estab- lished the control will only allow en- tries for these stages on all further pa- rameters for this product.
4.Press the ENTER KEY (14) again. The display reads P1:. The bottom display shows the cook time.
5.Press the SCAN KEY (15) to advance the pro- gramming mode to cook temperature.
Programming the Cook Temperature:
1.The top display reads Ct
2.Press the ENTER KEY (14) to save the new cook temperature for stage 1. The top display reads
NOTE: Repeat Steps 1
3.Press the SCAN KEY (15) to advance the pro- gramming mode to fan speed
Programming the Fan Speed:
1.The top display reads SPd1. The bottom dis- play gives the current fan speed. Press the TOGGLE/CLEAR KEY (11). The bottom dis- play toggles between HI and Lo.
2.Press the SCAN KEY (15) to advance the pro- gramming mode to the fan cycle time.
26
